Leave Your Message
Copper & Aluminum Foil Slitting Knife Selection Guide
Product Applications

Copper & Aluminum Foil Slitting Knife Selection Guide

2026-11-03

Raw copper and aluminum foil slitting is the front-end process of lithium-ion battery manufacturing.
Copper foil thickness commonly ranges from 4.5 μm to 6 μm, and Aluminum foil thickness ranges from 12 to 13 μm.
Modern production lines run at very high speeds, so improper knife selection will cause excessive burrs, frequent edge wear, and more production scrap.

Blade selection cannot only depend on the equipment model. Three core factors must be considered: foil thickness, line speed, and edge surface finish.

1111

111

  • demo336-about-line1
  • demo336-about-line2
  • demo336-about-line3
  • demo336-about-line2
  • demo336-about-line5
  • demo336-about-line2
  • demo336-about-line1

Foil Thickness

​

First, foil thickness directly sets blade requirements. Ultra-thin foils require ultra-tight dimensional tolerance and sharper edge geometry. Thicker foils bring higher cutting loads, so tougher carbide grades are necessary to resist microchipping.

Production Line Speed

 

Second, high-speed slitting generates obvious frictional heat. Ordinary grades will dull quickly under continuous high-speed friction. High-performance ultra-fine-grain carbide maintains edge sharpness under thermal load.

Edge Finishing

Mirror-polished cutting edges reduce material adhesion, keep burr height low, and avoid tiny metal fragments contaminating subsequent battery processes. Rough ground edges easily produce metal dust during foil shearing.

11

Shen Gong adopts self-developed ultra-fine-grain tungsten carbide for battery-grade foil slitting knives. Our in-house mirror grinding process delivers smooth, notch-free cutting edges. Different carbide grades are available for thin foil, low-speed, and heavy-duty, high-speed foil lines.

Many foil plant quality troubles trace back to unreasonable knife grade matching. If you meet burr-related puzzles in daily production, check our article about 

electrode slitting burr troubleshooting 

for practical on-site check steps.

We support custom edge geometry and dimension for special foil processing requirements. With more than 28 years of carbide knife manufacturing experience, we offer technical suggestions according to your real-world feedstock and machine parameters. Contact our engineering team for your foil filleting knife recommendation.