Lihlahisoa
Precision Carbide Slitting Lithipa Bakeng sa Cooper le Aluminium Foil
Tlhaloso e Felletseng
ShenGong Carbide Knives (SG) e sebetsa ka ho khetheha ka mahare a thata a thata a tungsten carbide a etselitsoeng lisebelisoa tsa bohlokoa tsa ho seha foil. Ka> 3500 MPa (matla a transverse rupture) le ho nepahala ha lebelo la micron, likhahla tsa rona tsa aluminium foil slitter li tlosa lerōle, li-burrs le litšitiso tse ka thōko-tse phethahetseng bakeng sa li-electrode foils (Li-ion / NiMH), liphutheloana tse feto-fetohang, le lisebelisoa tse ncha tse kopantsoeng.
Ke Hobane'ng ha SG e Slitting Lithipa?
Zero Burr Cutting: Theknoloji ea micro-grinding e netefatsa ho khaola ho hloekileng holim'a foil ea koporo ea 3.5μm & 15μm aluminium foil.
PVD Coating: 3–5X nako e telele ea bophelo khahlanong le mahare a sa koaheloang. E hanela ho senyeha, ho khomarela le ho senya.
Litharollo tse Tloaelehileng: Fetola bophara ba lehare, sekhutlo sa moeli, kapa sekoaelo ho hatella mapheo a maqhubu le likoli tse amanang le tsitsipano.
ISO 9001 & Ts'ehetso ea OEM: E tšeptjoa ke barekisi ba foil ba betri ea lefats'e le bahlahisi ba mochini o sehang.
Likaroloana
Sesebediswa sa Ultra-Hard: Tungsten carbide e kentsoeng ka thata ea HRC 90+.
E Enjenetsoe Bakeng sa Lithako Tse Nyenyane: E tšoara foil ea koporo ea 3.5-5μm, 15μm ea aluminium foil, le likarolo tse ngata tsa mekhahlelo.
Moralo oa Anti-Defect: Polelitsoe (sehlopha sa moeli) se fokotsa li-micro-cracks le delamination.
Matla a Etellang Liindasteri:> 3500 MPa e thibela ho phunya tlas'a sekhahla se phahameng sa lebelo.
PVD/DLC Coating Options: TiAlN, CrN, kapa carbon-like carbon (DLC) bakeng sa ho tšoarella ho feteletseng.
Litlhaloso
| Lintho | øD*ød*T mm |
| 1 | Φ50*Φ20*0.3 |
| 2 | Φ80*Φ20*0.5 |
| 3 | Φ80*Φ30*0.3 |
| 4 | Φ80*Φ30*0.5 |
Lisebelisoa
Lithipa tsa SG tsa carbide li ipabola mesebetsing ea bohlokoa ea ho seha bakeng sa lisebelisoa tse tsoetseng pele. Ba fana ka ts'ebetso e se nang sekoli ho li-ultra-thin anode copper foils (3.5-8μm) le li-cathode aluminium foils (10-15μm) bakeng sa libeteri tsa lithium-ion/NiMH. Barekisi ba lisebelisoa tsa betri ba itšetleha ka li-blade tsa rona bakeng sa lifolakha tse phuthoang tse hloekileng haholo, tse netefatsang hore mahlakore a se nang tšoaetso. Baetsi ba mochini oa Slitting ba kopanya mahare a rona a bophara ba tloaelo bakeng sa lisebelisoa tse nepahetseng tsa ho fetola li-foil. Lithipa li boetse li hlahisa lifilimi tse sireletsang tsa EMI tse sirelelitsoeng ka mokhoa o hloekileng le likaroloana tse tenyetsehang tsa PCB ntle le li-microtears. Ka mathōko a koahetsoeng ke PVD, a sebetsana le lifolakha tse entsoeng ka matla a macha le liphutheloana tsa elektroniki - li lula li feta lisebelisoa tse tloaelehileng tsa boleng bo holimo le bophelo bo bolelele.
Q&A
P: Thipa ea SG e ntlafatsa tlhahiso ea foil ea betri joang?
A: Taolo ea rona ea moeli oa micron e fokotsa ho taboha ha foil le ho hlahisa lerole, ho bohlokoa bakeng sa tlhahiso ea betri e potlakileng haholo.
P: A na u ka bapisa litekanyo tsa lehare tse teng?
A: Ho joalo! Fana ka bophara ba hau, OD, ID, kapa lehlakoreng la moeli - re fana ka lithipa tse lumellanang ka botlalo.
P: Ke ho roala hofe ho molemo ka ho fetisisa bakeng sa ho khaola li-foil tse kopantsoeng?
A: Ho roala ha DLC ho khothaletsoa bakeng sa likhalase tsa aluminium tse koahetsoeng ka carbon ka lebaka la thepa ea eona e se nang thupa.
