Kayayyaki
Wukake masu yanke Carbide na Cooper da Aluminum
Cikakken Bayani
Wukake na ShenGong Carbide (SG) sun ƙware a fannin yanke ruwan wukake masu ƙarfi na tungsten carbide waɗanda aka tsara don amfani da su wajen yanke foil. Tare da >3500 MPa (ƙarfin fashewa mai juyewa) da daidaiton gefen micron, ruwan wukake na aluminum ɗinmu yana kawar da ƙura, ƙura, da lahani na gefen - cikakke ne ga foil ɗin lantarki na batir (Li-ion/NiMH), marufi mai sassauƙa, da sabbin kayan haɗin gwiwa.
Me yasa ake yanka wukake na SG?
Yankan Burr Ba tare da Burr ba: Fasahar niƙa mai ƙananan na'urori tana tabbatar da tsaftace gogewar jan ƙarfe mai girman 3.5μm da kuma foil ɗin aluminum mai girman 15μm.
Rufin PVD: Tsawon rai sau 3-5 idan aka kwatanta da ruwan wukake marasa rufi. Yana jure lalacewa, mannewa, da tsatsa.
Magani na Musamman: Gyara faɗin ruwan wuka, kusurwar gefen, ko shafi don danne gefuna masu lanƙwasa da lahani da suka shafi tashin hankali.
ISO 9001 & Taimakon OEM: Masu samar da foil na batirin duniya da masana'antun injin yankewa sun amince da su.
Siffofi
Kayan da Yake da Tauri sosai: An yi shi da simintin tungsten carbide mai tauri daga sama da 90.
An ƙera shi don ƙananan foils: Yana da ikon sarrafa foil ɗin jan ƙarfe mai tsawon 3.5–5μm, foil ɗin aluminum mai tsawon 15μm, da kuma haɗakar abubuwa masu faɗi da yawa.
Tsarin hana lahani: Gogewa (band ɗin gefen) yana rage ƙananan fasa da ɓarna.
Ƙarfin Jagorancin Masana'antu: >3500 MPa yana hana guntuwar ƙarfe a ƙarƙashin yankewa mai sauri.
Zaɓuɓɓukan Rufewa na PVD/DLC: TiAlN, CrN, ko carbon mai kama da lu'u-lu'u (DLC) don dorewa mai yawa.
Bayani dalla-dalla
| Abubuwa | øD*ød*T mm |
| 1 | Φ50*Φ20*0.3 |
| 2 | Φ80*Φ20*0.5 |
| 3 | Φ80*Φ30*0.3 |
| 4 | Φ80*Φ30*0.5 |
Aikace-aikace
Wukake masu yanke carbide na SG sun yi fice a cikin muhimman ayyukan yankewa ga kayan aiki na zamani. Suna ba da aiki mai kyau akan foil ɗin jan ƙarfe na anode mai siriri (3.5-8μm) da foil ɗin aluminum na cathode (10-15μm) don batirin lithium-ion/NiMH. Masu samar da kayan batirin sun dogara da ruwan wukakenmu don foil ɗin da aka naɗe masu tsarki, suna tabbatar da cewa gefuna ba su da gurɓatawa. Masana'antun injin yankewa suna haɗa ruwan wukakenmu na musamman don kayan aikin canza foil daidai. Wukake kuma suna samar da fina-finan kariyar EMI masu tsabta da kuma abubuwan PCB masu sassauƙa ba tare da ƙananan hawaye ba. Tare da gefuna masu rufi da PVD, suna kula da foil ɗin da aka haɗa a cikin sabbin makamashi da marufi na lantarki - suna yin aiki mai kyau a cikin ingancin gefen da tsawon rai.
Tambaya da Amsa
T: Ta yaya wukar SG ke inganta yawan amfani da foil ɗin batir?
A: Kulawar gefen micron ɗinmu yana rage tsagewar foil da ƙura, wanda yake da mahimmanci don samar da batirin mai sauri.
T: Za ku iya daidaita girman ruwan wukake da ke akwai?
A: Eh! Ka samar da faɗinka, OD, ID, ko kusurwar gefenka—muna kawo wukake masu yankewa masu dacewa.
T: Wane shafi ne ya fi dacewa don yanke foil ɗin haɗin gwiwa?
A: Ana ba da shawarar shafa DLC don foil ɗin aluminum mai rufi da carbon saboda rashin mannewa.
