Kayayyaki
Injin Niƙa Tungsten Carbide na Aluminum Ingot | Kayan Aikin Gyaran Kaya na Foundry
Cikakken Bayani
Wukake na Shengong Carbide sun ƙware a cikin kayan gyaran fuska na tungsten carbide masu inganci waɗanda aka tsara don sarrafa aluminum na farko. An gina kayan gyaran fuska na ingot na aluminum ɗinmu don aikin niƙa fuska wanda ke cire oxides na saman, yadudduka na rarrabuwa da lahani na siminti daga billets na aluminum kafin a fara birgima mai zafi. Tare da ƙarfin fashewa mai wucewa sama da 3200 MPa da daidaiton gefen micron, kayan gyaran fuska namu suna kiyaye daidaiton yanayin yankewa a ƙarƙashin yanayi mai nauyi na cire kayan aiki - suna ba da kammala saman iri ɗaya da tsawon lokacin sabis na sakawa a duk lokacin da ake ci gaba da yin aiki.
Me Yasa Zabi Injunan Niƙa Aluminum na Shengong?
Juriyar Lalacewa Mai Kyau: Substrate mai ƙarancin ƙwayar carbide yana jure wa dogon hulɗa da aluminum oxides, yana tsawaita rayuwar sa har zuwa 30% idan aka kwatanta da daidaitattun matakan carbide.
Kammalawa ta Hana Mannewa: Fuskokin rake masu kyau da aka goge suna rage tarin aluminum da samuwar gefen da aka gina, suna rage lokacin tsaftacewa akai-akai
Daidaito Mai Girma: Tsarin haƙuri mai tsauri yana tabbatar da zurfin yankewa iri ɗaya a faɗin faɗin ingot, yana kawar da rashin daidaiton ingancin saman
Tallafin Injiniya na Musamman: Gyara girman sakawa, kusurwoyin gefe da matakan substrate don dacewa da takamaiman ƙirar kan scalper da nau'ikan ƙarfe na aluminum
Babban Sifofi
Daraja ta Carbide Mai Kyau: Carbide mai ƙarfi mai ƙarfi na WC-Co tare da taurin HRA 91.6-92.6, daidaita taurin saman da taurin karyewa don ayyukan gyaran ƙarfe masu nauyi.
Tsarin Gefen da aka Inganta: Gefunan yanke ƙasa masu daidaito tare da kusurwoyin rake masu sarrafawa, an ƙera su don rage ƙarfin yankewa da haɓaka kwararar guntu mai tsabta a cikin niƙa fuskar aluminum
Maganin saman Anti-BUE: Fuskokin gefe da rake da aka goge da madubi suna rage mannewar aluminum sosai da samuwar gefen da aka gina yayin ci gaba da yankewa
Babban Ƙarfin Tsagewa: >2800 MPa TRS yana hana tsagewa da karyewa a ƙarƙashin nauyin tasirin da aka saba gani a cikin gyaran ingot
Zaɓuɓɓukan Rufi Akwai: TiN, DLC ko fenti na musamman waɗanda ba na ƙarfe ba suna samuwa idan an buƙata don haɓaka juriyar lalacewa da aikin hana mannewa.
Bayani dalla-dalla
| Abu | Ma'aunin Daidaitacce (L×W×H mm) |
| 1 | 25×25×10 — Haɗa rami ɗaya |
| 2 | 30×30×12 — Tsarin ramin da aka toshe |
| 3 | 40×25×15 — Ruwan wuka mai nauyi mai kauri |
| 4 | Ana iya samun girma na musamman akan buƙata |
Gyaran da aka yi musamman sun haɗa da: wasu tsare-tsare na rami, kusurwoyin gefen musamman, tsarin chamfer da zaɓin matakin substrate don dacewa da takamaiman kayan aikin scalping.
Aikace-aikace
Ana amfani da kayan niƙa aluminum na Shengong's carbide a manyan wuraren samar da aluminum da kuma naɗawa don shirya saman billets da ingots na aluminum:
Masana'antar Buga Aluminum: A shafa fenti a fuska da sinadarin aluminum da kuma ƙarfe mai kauri (jerin 1xxx zuwa 7xxx) kafin a yi birgima mai zafi, a cire fatar da aka yi amfani da ita wajen yin siminti, yadudduka masu ɗauke da sinadarin oxide da kuma yankunan da aka raba su da yawa.
Shuke-shuken Fitar da Aluminum: Niƙa fuska da kuma aikin niƙa fuska don tabbatar da cewa kayan aiki iri ɗaya ne yayin fitarwa
Babban Narkewar Aluminum: Gyaran ingot da cire lahani a saman don sake narkewa da ayyukan gyaran gida
Sarrafa Karfe Marasa Karfe: Niƙa saman jan ƙarfe, tagulla da sauran billets marasa ƙarfe inda ake buƙatar juriya mai ƙarfi da kuma hana mannewa.
Injinan niƙa mu sun dace da duk manyan nau'ikan injinan scalper, gami da rukunin SMS, Hertwich, da layin scalping na Danieli.
Tambaya da Amsa
T: Ta yaya abin da aka saka a cikin injin niƙa na aluminum ɗinka ke rage tarin aluminum a gefen ƙarshe?
A: Abubuwan da muka saka sun haɗa da rake da saman gefe da aka goge da madubi tare da ingantaccen tsarin gefuna, wanda ke rage mannewa sosai ga kayan. Don matsanancin yanayin mannewa, muna kuma bayar da DLC ko wasu rufin da ba su da ƙarfe na musamman waɗanda ke ƙara rage samuwar gefuna da aka tara.
T: Za ku iya ƙera kayan niƙa don dacewa da girman kan scalper ɗinmu na yanzu?
A: Eh. Ka samar da tsawon shigarka, faɗi, kauri, tsarin rami da kuma ƙayyadaddun kusurwar gefenka - muna samar da kayan niƙa na aluminum masu canzawa waɗanda suka dace da ainihin buƙatun kayan aikinka.
T: Wane irin nau'in carbide ne aka ba da shawarar ga ƙarfe mai yawan silicon?
A: Ga ƙarfe mai yawan silicon wanda ke haifar da lalacewar abrasion, muna ba da shawarar matsakaicin nauyin carbide na hatsi mai yawan cobalt. Wannan tsari yana samar da ingantaccen tauri na karyewa yayin da yake riƙe da isasshen juriya ga lalacewa don ayyukan gyaran ƙarfe masu wahala.
